A pyrimidine thiolate Rh(I) complex: structure, bonding and one-dimensional interactions in solid and in solution

The reaction of [Rh(micro-Cl)(COD)]2 with 4,6-dimethyl-pyrimidinethiolate (Me2-pymt) and subsequent substitution of COD by CO yields [Rh(Me2-pymt)(CO)2]. The stacking pattern found in this compound is in contradiction with previously studied comparable square-planar complexes of type d8-[M(chelate)(monodentate)2] in which each ligand has different pi-acidic character. A theoretical study of the intermolecular interactions and conformation of the title compound has been carried out, combining semi-empirical band calculations on the real chains and ab initio(MP2 level) calculations on a model dimer. The combination of electronic and steric effects determines the rotation of the successive monomers and the deviation from linearity of the one-dimensional stacks. Its behaviour in solution is also special, developing a blue colour and forming micelles, when adding water to acetone solutions.     

Use of modified rice husks as a natural solid adsorbent of trace metals: characterisation and development of an on-line preconcentration system for cadmium and lead determination by FAAS

The use of rice husks as an alternative adsorbent in an on-line preconcentration system for Cd (II) and Pb (II) determination by flame atomic absorption spectrometry (FAAS) is described. The potential of rice husks as a natural adsorbent was evaluated as a material modified with 0.75 mol l⁻¹ NaOH solution and in the unmodified form. For this task, several techniques such as spectroscopy and thermogravimetry were used for elucidation of possible functional groups responsible for the uptake of Cd (II) and Pb (II). Furthermore, based on adsorption studies and adsorption isotherms applied to the Langmüir model, it was possible to verify that modified rice husks present a higher adsorption capacity for both metals. After establishing this material as a promising natural adsorbent, it was used for on-line preconcentration of Cd (II) and Pb (II) metals. The multivariate optimisation of chemical and flow variables was performed by using a full factorial design (2⁴) including the following factors: preconcentration time, preconcentration flow rate, concentration and volume of eluent. The optimum pH values used for on-line preconcentration were taken from prior univariate experiments. Under optimised conditions for Cd (II) determination (4 min of preconcentration at a 6 ml min⁻¹ preconcentration flow rate, in which comprises 24 ml of preconcentration volume, 200 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent), the system achieved a detection limit of 1.14 μg l⁻¹ and an enrichment factor of 72.4. Similar conditions were used for Pb (II) determination (4 min of preconcentration, 6 ml min⁻¹ preconcentration flow rate, 300 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent) from which a detection limit of 14.1 μg l⁻¹ and enrichment factor of 46.0 were achieved. Also, rice husks have been shown to be a homogeneous and stable adsorbent in which more than 100 preconcentration/elution cycles provide a relative standard deviation (RSD) of less than 6.0% on the analytical signal. The satisfactory accuracy of the method developed was obtained by using spiked water samples (mineral water and lake water) and spiked red wine samples. These values were confirmed by electrothermal atomic absorption spectrometry (ETAAS). The certified reference material [pig kidney (CRM 186)] and the reference material [beech leaves (CRM 100)] were also used.     

Solid-phase synthesis of the cyclic lipononadepsipeptide [N-Mst(Ser1), d-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin

An optimized solid-phase strategy for the preparation of the cyclic lipononadepsipeptide [N-Mst(L-Ser1), D-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin is reported. The strategy is based on the use of a mild orthogonal protection scheme and the incorporation of the nonproteinogenic amino acid (Z)-Dhb into the peptide chain as the dipeptide Fmoc-Thr(tBu)-(Z)-Dhb-OH. The didehydrodipeptide was synthesized by a water-soluble carbodiimide-induced beta-elimination of a protected dipeptide containing a residue of Thr with its free hydroxy side chain unprotected.     

A density functional theory study of the gas-phase elimination reactions of 4-arylideneimino-1,2,4-triazol-3(2H )-ones and their 3(2H )-thione analogues

Theoretical studies on the thermolysis in the gas phase of 4-arylideneimino-1,2,4-triazol-3(2H)-ones and 4-arylideneimino-1,2,4-triazol-3(2H)-thiones were carried out using density functional theory methods, at the B3LYP/6-31G(d) and B3LYP/6-311+G(2d,p) levels of theory. The proposed reaction mechanism occurs in one step, leading to the formation of 3-hydroxy-(2H)-1,2,4-triazole or 3-mercapto-(2H)-1,2,4-triazole and a 4-substituted benzonitrile, via a six-membered cyclic transition state. The progress of the reactions was followed by means of the Wiberg bond indices. The results indicate that the transition states have character intermediate between reactants and products, and the calculated synchronicities show that the reactions are slightly asynchronous, in the case of triazolones, and show a higher asynchronicity in the case of triazolthiones. The bond-breaking processes are slightly more advanced than the bond-forming ones, indicating a small bond deficiency in the transition states. Kinetic and activation parameters for the reactions studied have been calculated and compared with available experimental data.From the Proceedings of the 28th Congreso deQuímicos Teóricos de Expresión Latina (QUITEL 2002)     

Toward inorganic electrides

Electrides are materials in which alkali metals (Li through Cs) ionize to form bound alkali cations and "excess" electrons. The electrons reside in large cavities or channels or both in the host lattice. We report here the first synthesis of thermally stable inorganic electrides with cation-to-electron ratios of 1:1 as in organic electrides. Although alkali metal adducts to alumino-silicate zeolites are well known, the cation-to-electron ratio is generally 3:1 or greater because these zeolites contain alkali cations prior to incorporation of the alkali metal. In this work, two pure silica zeolites, ITQ-4and ITQ-7, with pore diameters of approximately 7 A, absorb up to 40 wt % cesium from the vapor phase (even at room temperature). The other alkali metals (except Li) can also be introduced at elevated temperatures. The optical and magnetic properties of the cesium-loaded samples suggest ionization to form Cs+ and e- with substantial electron-spin pairing. The metal-loaded samples are stable to at least 100 degrees C and are able to reduce small aromatic molecules such as benzene and naphthalene to the radical anions within the pores of the zeolite.     

Phase separation in manganites induced by orbital-ordering strains

Doped manganite perovskites AMnO(3) exhibit a rich variety of electronic properties, resulting from the interplay of charge (Mn(3+)/Mn(4+)), spin (Mn magnetic moment) and orbital (Mn(3+) Jahn-Teller distortion) degrees of freedom. Magnetisation measurements and ESR spectra have been used to study a series of eight AMnO(3) perovskites, in which the A cation sites are occupied by a distribution of 70% trivalent lanthanide and 30% divalent Ca, Sr or Ba ions. These all have a mean A cation radius of 1.20 Angstrom but different values of the cation size variance sigma(2). A change from orbital disorder to order (cooperative Jahn-Teller distortions) was previously found in the insulating regime at sigma(2) = approximately 0.005 Angstrom(2). This work has shown that co-existence of the orbitally ordered and disordered phases is found in sigma(2)= 0.0016-0.0040 Angstrom(2) samples, with a difference of 40 K between their Curie temperatures. This is ascribed to competition between orbital ordering and microstructural lattice strains. At larger sigma(2) > 0.005 Angstrom(2), the orbital ordering strains are dominant and only this phase is observed. This intermediate temperature phase segregation is one of many strain-driven separation phenomena in manganites.     

Physicochemical aspects of the liposome-wool interaction in wool dyeing

Despite the promising application of liposomes in wool dyeing, little is known about the mechanism of liposome interactions with the wool fiber and dyestuffs. The kinetics of wool dyeing by two dyes, Acid Green 27 (hydrophobic) and Acid Green 25 (hydrophilic), were compared in three experimental protocols: (1) without liposomes, (2) in the presence of phosphatidylcholine (PC) liposomes, and (3) with wool previously treated with PC liposomes. Physicochemical interactions of liposomes with wool fibers were studied under experimental dyeing conditions with particular interest in the liposome affinity to the fiber surface and changes in the lipid composition of the wool fibers. The results obtained indicate that the presence of liposomes favors the retention of these two dyes in the dyeing bath, this effect being more pronounced in case of the hydrophobic dye. Furthermore, the liposome treatment is accompanied by substantial absorption of PC by wool fibers with simultaneous partial solubilization of their polar lipids (more evident at higher temperatures). This may result in structural modification of the cell membrane complex of wool fibers, which could account for a high level of the dye exhaustion observed at the end of the liposome dyeing process.     

Automatic flow procedure for the determination of glycerol in wine using enzymatic reaction and spectrophotometry

An automatic flow procedure for the determination of glycerol in wines by employing a flow system based on multicommutation and enzymatic reaction is described. Glycerol dehydrogenase was immobilized on aminopropyl glass beads and packed into a column that was coupled to the flow system. The NADH produced by the enzymatic reaction was monitored by spectrophotometry at 340 nm and its radiation absorption presented a relationship with glycerol concentration. The system manifold comprised a set of three-way solenoid valves controlled by a microcomputer, which was furnished with electronic interfaces and runs a software that was designed to carry out on-line sample dilution, reagent addition, and data acquisition. The procedure allows the determination of glycerol in wine samples without any prior pretreatment. The procedure presented as profitable features a linear response range between 2.0 and 10.0 g l⁻¹ glycerol (R=0.998), a detection limit of 0.006 g l⁻¹ glycerol, a relative standard deviation of 1.8% (n=14) for a typical wine sample presenting 5.3 g l⁻¹ glycerol, a sampling throughput of 33 determinations per hour, and a NAD⁺ consumption of 0.8 mg per determination. The results were compared with those obtained using a reference method and no significant difference at 90% confidence level was observed.     

Spectroscopic and photochemical properties of the lichen compound lobaric acid

Lichens synthesize and accumulate photoprotective compounds against possible damage induced by UV radiation in the photobiont. A biological model has been recently formulated that allows the use of lichens to evaluate changes at different UV radiation levels. The thermodynamics, photophysical and photochemical properties of lobaric acid were studied in acetonitrile, ethanol and Brij 35(3%) micelles at different pH values. Also the sun protector factor (SPF) was determined by in vitro methods. Lobaric acid was extracted from Stereoculon alpinum Laur. and characterized by means of standard procedures. Solutions were irradiated in oxygen and under nitrogen conditions with a UV medium pressure lamp. Lobaric acid absorbs at 287, 303 nm, and no fluorescence emission was observed. The maximum value of the molar extinction coefficient (5479.6 M(-1) cm(-1)) was obtained in Brij 35 at pH 12. Solubility is pH dependant and is highest in Brij 35 at pH 12 (4.45 x 10(-4) M). Photoconsumption quantum yields ranged between 10(-4) and 10(-5) in aerobic and anaerobic experimental conditions. Lobaric acid SPF was very low (0.5) compared with homosalate (4.0), (reference solar filter). Two pKa values, 5.05 (carboxylic acid group deprotonation) and 9.75 (phenolic OH deprotonation), were determined.     

Cloud point extraction of vanadium in parenteral solutions using a nonionic surfactant (PONPE 5.0) and determination by flow injection-inductively coupled plasma optical emission spectrometry

A preconcentration and determination methodology for vanadium at trace levels in parenteral solutions was developed. Cloud point extraction was successfully employed for the preconcentration of vanadium prior to inductively coupled plasma atomic optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) system. The vanadium was extracted as vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol [V-(5-Br-PADAP)] complex, at pH 3.7 mediated by micelles of the nonionic surfactant polyoxyethylene (5.0) nonylphenol (PONPE 5.0). The extracted surfactant-rich phase (100 mul) was mixed with 100 mul of ethanol and this final volume injected into ICP-OES for the vanadium determination. Under these conditions, the 50 ml sample solution preconcentration allowed raising an enrichment factor of 250-fold; however, it was possible to obtain a theoretical enrichment factor of 500-fold. The lower limit of detection (LOD) obtained under the optimal conditions was 16 ng l(-1). The precision for 10 replicate determinations at the 2.0 mug l(-1) V level was 2.3% relative standard deviation (RSD), calculated with the peak heights. The calibration graph using the preconcentration system for vanadium was linear with a correlation coefficient of 0.9996 at levels near the detection limits up to at least 50 mug l(-1). The method was successfully applied to the determination of vanadium in parenteral solution samples.